KPP-ANTALIS (MALAYSIA) SDN BHD 662405-H
[Southern] Johor
No. 15, Jalan Selatan 3, Taman Perindustrian Ringan Pulai, 81300 Skudai, Johor, Malaysia.
+607-562 4833
+6016-733 3606
+6016-733 3606
+60137783605
Message UsKPP-ANTALIS (MALAYSIA) SDN BHD 662405-H
[Central] Negeri Sembilan, KL & Selangor
Wisma Comcorp 37, Level 3A, Section U1, Temasya Industrial Park, Shah Alam, Malaysia, Jalan Pelukis U1/46, Kawasan Perindustrian Temasya, 40150 Shah Alam, Selangor, Malaysia.
+6016-7133605 (William)
info@imagejunction.com.my
KPP-ANTALIS (MALAYSIA) SDN BHD 662405-H
[Northern] Perak, Penang, Perlis & Kedah
290, Jalan Gurdwara, George Town, 10300 George Town, Pulau Pinang, Malaysia.
+6016-7103605KPP-ANTALIS (MALAYSIA) SDN BHD 662405-H
[East Malaysia & Brunei]
Sabah , Sarawak & Brunei
Shoplot No 9, Block D, Ground Floor, Putatan Platinum Plaza, 88200 Putatan, Sabah, Malaysia.
+6016-716 3606
+6016-886 3605
LAR Series
| Previous | 1 / 2 | Next |
Wide Format Laminator LAR 63 £ü Mimaki La meccanica~Mimaki's Pre/Post Process Equipment Brand
LAR Series
The ''LAR-63'' is a large-format laminator that features a one-touch roll media loading mechanism that facilitates smooth media installation and replacement. This reduces the burden of daily setup changes and enables stable lamination operations even by a single operator.
Model
Product outlines
Feature
1. Media Loading Made Even Easier! One-Person Media Changes with Confidence
Previous Model
LAR-63
2. For a Safer Workplace and Consistent Quality
3. Consistent Lamination Quality with Simple Operation
Pressure Roller Adjustment
Adjust the pressure roller gap using the roller up/down handle.
Designed with a Focus on Ease of Use and Safety; Made for Everyday Sign Making ''LAR-63'' Large-Format Laminator for Sign Graphics
''Mimaki La-meccanica'' is a Mimaki’s new brand of printer peripheral equipment designed to enhance the value of the entire printing workflow, including both pre- and post-printing processes.
By pursuing the safety, ease of operation, and reliability required in printing environments, we aim to reduce the burden on operators. Furthermore, by providing a safe working environment and ensuring consistent quality, we will contribute to our customers’ increased productivity and business growth.
The ''LAR-63'' is a large-format laminator that features a one-touch roll media loading mechanism that facilitates smooth media installation and replacement. This reduces the burden of daily setup changes and enables stable lamination operations even by a single operator.
Model
| LAR-63 | Maximum media width: 1,580 mm (62.2'') |
Product outlines
- One-Person Media Changes with Confidence
- For a Safer Workplace and Consistent Quality
- Consistent Lamination Quality with Simple Operation
Feature
1. Media Loading Made Even Easier! One-Person Media Changes with Confidence
Previous Model
LAR-63
2. For a Safer Workplace and Consistent Quality
3. Consistent Lamination Quality with Simple Operation
Pressure Roller Adjustment
Adjust the pressure roller gap using the roller up/down handle.
The roller gap opens up to 35 mm, making it easy to load laminating film.
Control Panel
Control Panel
Easy and Intuitive lamination controls
- Heater Temperature
- Lamination Speed
Heat-Assisted Pressure Roller
Heating the media during lamination improves adhesion between the media and laminating film.
Heat-Assisted Pressure Roller
Heating the media during lamination improves adhesion between the media and laminating film.
- Lamination in Low-Temperature Environments
- Reduced Silvering on UV-Printed Media
Foot Switch
Keep both hands free for easy, straight media alignment.
Foot Switch
Keep both hands free for easy, straight media alignment.
Specifications
| LAR-55 (Japan only) | LAR-63 | |
|---|---|---|
| Maximum Media Width | 1,380 mm (54.3'') | 1,580 mm (62.2'') |
| Maximum Media Thickness | 35 mm (1.4'') | |
| Operating Temperature | Max. 60 ¡æ (140 °F) | |
| Lamination Speed | Max. 7.5 m/min *6.0 m/min in regions with a 50 Hz power supply | |
| Number of Media Shafts | 5 |
Japan: 5 Other regions: 4 |
| Media Shaft Mounting | One-touch mounting | |
| Length Counter Function | Not Available | |
| Power specification | Single phase AC100V, 50/60Hz |
Japan: Single phase AC100V, 50/60Hz North America: Single phase AC120V, 50/60Hz Europe: Single phase AC230V, 50/60Hz Australia: Single phase AC240V, 50/60Hz |
| Power consumption | 1,800 W or less | |
| Dimensions (W×D×H) |
1,830 x 550 x 1,280 mm (72.0 x 21.7 x 50.4'') |
2,000 x 550 x 1,280 mm (78.7 x 21.7 x 50.4'') |
| Weight | 185 kg (407.9 lb) | 205 kg (451.9 lb) |
| Certifications | PSE |
Japan: PSE North America: cTUVus Europe: CE Marking Australia: RCM* *scheduled for September |
| Manufacturer's Warranty | 2 Years | |
- Specifications are subject to change without notice.
- All trademarks or registered trademarks are the property of the respective owners.