KPP-ANTALIS (MALAYSIA) SDN BHD 662405-H
[Southern] Johor
No. 15, Jalan Selatan 3, Taman Perindustrian Ringan Pulai, 81300 Skudai, Johor, Malaysia.
+607-562 4833
+6016-733 3606
+6016-733 3606
+60137783605
Message UsKPP-ANTALIS (MALAYSIA) SDN BHD 662405-H
[Central] Negeri Sembilan, KL & Selangor
Wisma Comcorp 37, Level 3A, Section U1, Temasya Industrial Park, Shah Alam, Malaysia, Jalan Pelukis U1/46, Kawasan Perindustrian Temasya, 40150 Shah Alam, Selangor, Malaysia.
+6016-7133605 (William)
info@imagejunction.com.my
KPP-ANTALIS (MALAYSIA) SDN BHD 662405-H
[Northern] Perak, Penang, Perlis & Kedah
290, Jalan Gurdwara, George Town, 10300 George Town, Pulau Pinang, Malaysia.
+6016-7103605KPP-ANTALIS (MALAYSIA) SDN BHD 662405-H
[East Malaysia & Brunei]
Sabah , Sarawak & Brunei
Shoplot No 9, Block D, Ground Floor, Putatan Platinum Plaza, 88200 Putatan, Sabah, Malaysia.
+6016-716 3606
+6016-886 3605
Ri-Jet M100 Special Perm Grey SA
| Previous | 3 / 5 | Next |
Fedrigoni
.jpg)
Ri-Jet M100 Special Perm Grey SA
PRODUCT DESCRIPTION / BENEFITS
Ri-Jet M100 Special Perm Grey series is a self-adhesive film for Large Format Digital printing,
especially designed for application on flat surfaces.
The monomeric vinyl, UV stabilised, has an external colour stability up to 1 year, specially developed
to be printed with solvent, eco-solvent, latex, and UV inkjet printing presses.
The 100 µm film thickness grants good ink absorption without making the face film too soft, which
allows easier application. The permanent adhesive provides a good adhesion on a wide range of
substrates. The 140g/m² PE coated kraft paper ensures good planarity and printing results.
TYPICAL USE
• Short term outdoor advertising: trains, bus, billboards
• Short term indoor advertising: shops and malls, airport terminals, …
• Temporary point of sale advertising.
CONSTRUCTION
• Face film: 100 µm calendered monomeric film
• Adhesive: permanent grey solvent-based acrylic
• Release liner: PE coated kraft paper 140 g/m2
CONVERTING METHOD
Specially developed to be printed with solvent, eco-solvent, latex, and UV inkjet printing presses.
To achieve the best possible print quality, make sure that the correct ICC profiles or printer settings
are used. The printed media should dry minimum 24h prior to lamination.
We suggest a lamination with Ri-Lam M70 Clear Gloss, Matt or Satin to protect the printed image
from UV fading and mechanical abrasion.
APPLICATION METHOD / INSTRUCTIONS FOR USE
Suitable for dry and wet application method on clean and degreased substrates.
Application temperature above 10°C.
EXPECTED DURABILITY
The expected vertical outdoor durability in zone 2 is 1 year.
This information is based on real file experience and artificial aging according to ISO 4892-2.
Note: Exposure to severe temperature and ultra-violet light will cause a quicker deterioration. This
applies also to polluted area, high altitude, horizontal applications, and south-facing exposure in
north hemisphere.
SHELF LIFE
Shelf life is 1 year, when stored at 23 °C and 50 % relative humidity conditions.
Higher temperatures and/or humidity levels will reduce product shelf life.